Print Article
BookMark Article
10 newest articles RSS
Night Vision Binoculars: See Clearly In Low Light Conditions
Author : Leo Biggs
Submitted : 2012-01-11 11:22:27 Word Count : 619 Popularity: 27
Tags: night vision binoculars, binoculars uk, which binoculars, Bushnell binoculars, binoculars explained
No matter if you are at the waterfront watching boats approaching from yonder or at the outdoor nature park or bird watching by dusk, one of the essentials you may need is your night vision binoculars. These help you to see objects clearly in conditions of low light, which you will not be able to see with your ordinary binoculars. Their ability to get this done depend either on light amplification or thermal imaging both of which have been designed initially for military applications and have like many other technologies found alternate use within our daily lives too.
Basically most night vision binoculars work by amplifying the existing light which is too poor for our naked eyes to see things or objects, especially from a distance. Briefly, this is accomplished by electronic means, which convert the light in to electrical currents of the order of a few micro amps and amplify them. Thereafter these are converted back into light and the object thus will get clearer to our vision. For this reason they use a matrix of photosensitive components. Depending on the type of technology used in conversion from light to electric and back, the night vision binoculars are classified as first, second or third generation. The newest versions are capable of even recording the objects you are viewing and some models have facility to directly hook them to camcorders! So keep in mind to ask your dealer for these specific details and features. Of course, it goes without saying that the cost will be proportionate to the degree of sophistication!
When you have numerous options, which is usually the case, the specific features you should remember to ask consist of the following:
-Magnification: this will establish how close the object will appear. E.g., 8X means, the object appears to you 8 times closer than it actually is. Usually 7X to 14X are available and will meet with most requirements, unless you want it for monitoring your perimeter from the house and the fencing is very far in certain sectors or such very same situations.
-Zoom: the capability to make adjustments to the magnification as needed i.e., between 7X and 14X you can select. All binoculars are NOT supplied with this control.
-Aperture: measured in mm, it represents the diameter of the front or objective lens; larger the aperture, more light is gathered by the electronics and b- this is measured better or clearer is the view. For recreational purposes, 20 to 60 mm is adequate, but for surveillance or hunting you may need more and there are models offering 70 mm or more.
-Field Of View (FOV): this is measured in degrees or specified in linear feet such as 1000 yards. Wider field of view allows you to see a wider picture.
-Number of prisms: usually there are Roof (small prisms used in smaller models) or Porro prisms for larger FOV
-Focus: single focus control for both eye pieces, with Diopter control independently in some models.
There is also single tube double view or double tube double view depending on whether there is single objective or double objective, the double view meaning two eye pieces. Extras such as rubber casing, armored, water proof and fog proof are features which may be handy for the duration of camping, hiking, rock climbing or white water rafting trips.
Author's Resource Box
We showcase an impressive selection of night vision binoculars to match hobbyists and professionnals budget. Come and visit our online store here.
Article Source:
Articles Alive